Zenvia LED Alabaster Wall Light - Brushed Brass

Description

The Zenvia is a 600mm vertical alabaster wall light built around a slim 100mm-wide column of natural Spanish alabaster, mounted to a brushed brass back plate. An integrated 10W LED runs the length of the fitting, casting warm 3000K light through the stone so the alabaster itself becomes the diffuser. The fixture projects roughly 100mm from the wall, keeping a low profile against flat plaster.

Designed for hallways, stairwells, bedrooms and living areas where vertical emphasis suits the architecture, the Zenvia works as ambient or accent light rather than task light. The elongated form draws the eye upward and pairs well with high ceilings, panelled walls or alcove returns. Installed in pairs either side of a bed, mirror or doorway, the matched columns frame the wall plane and give a measured rhythm to the lit space.

Each alabaster column is cut from natural Spanish stone, so veining, translucency and tonal variation differ between individual pieces. The brushed brass back plate has a soft satin finish that catches light without producing the high reflections of a polished surface, sitting comfortably alongside warm wood, painted plaster and stone interiors. At 230V mains with an integrated LED, the Zenvia is hard-wired and does not require a replaceable bulb.

Specification

Frequently Asked

Does the Zenvia need a separate bulb?

No. The Zenvia uses an integrated 10W LED running the length of the fitting, so there is no replaceable bulb. The LED runs on 230V mains and is hard-wired during installation.

Is it suitable for bathrooms?

The Zenvia does not carry a published IP rating, so it is intended for dry indoor locations such as hallways, bedrooms, stairwells and living areas. It should not be installed in bathroom zones or other damp locations.

Will the alabaster look the same as the photo?

Each column is cut from natural Spanish alabaster, so veining, translucency and tonal variation differ between pieces. The shape and proportions match the photograph, but the exact pattern of marbling on your fitting will be unique.

Can it be installed horizontally?

The Zenvia is designed as a vertical wall fitting and is most commonly installed with the alabaster column running upright. Horizontal installation is technically possible on a flat wall, but the cable entry and back plate orientation should be confirmed before fitting.