Seraphis LED Alabaster Ring Chandelier 500mm - Brushed Brass

Description

The Seraphis is a 500mm alabaster ring chandelier built around a single horizontal band of natural Spanish alabaster, carved with a consistent 60mm section to form an uninterrupted circle. The ring is suspended from three fine steel cables that rise to a brushed brass canopy, with an integrated LED running inside the band emitting warm 3000K light through the stone.

Sized for dining tables, kitchen islands, entrance halls and open-plan living spaces, the 500mm diameter suits rooms with ceiling heights from 2.4m upwards. The cable suspension is adjustable on installation, allowing the ring to sit 700-800mm above a dining surface or higher in a hallway. The brushed brass canopy fits standard UK ceiling roses and conceals the driver and connections.

Each ring is cut from solid alabaster, so the veining, mineral density and tonal variation differ across the circumference of every piece. Softly honed surfaces leave the internal structure of the stone visible, and when the LED is lit the band glows evenly through its 60mm thickness, drawing out cloudier passages and translucent areas in turn. The brushed brass hardware on the canopy and cable terminations adds a warm metallic counterpoint to the pale stone without competing with it.

Specification

Frequently Asked

What size room does the Seraphis suit?

The 500mm diameter works well over dining tables seating four to six, square kitchen islands of around 1.2-1.5m, entrance halls and reading areas. For larger 8-10 seat dining tables or wide islands, consider the larger Seraphis size in the same range.

Is the chandelier dimmable?

The integrated LED runs on 230V mains at a 3000K warm white colour temperature. Dimmer compatibility depends on the specific dimmer model — please contact us before pairing with a dimmer to confirm.

Does each ring look the same?

No. Each ring is carved from solid natural Spanish alabaster, so the veining, tonal variation, mineral inclusions and translucent passages differ between individual pieces. This is a feature of the natural stone, not a defect, and becomes most visible when the LED is lit.

How is the alabaster cleaned?

Alabaster is porous and softer than marble. Wipe the ring gently with a dry, soft microfibre cloth. Avoid water, household sprays, polishes and chemical cleaners, as these can mark or damage the stone surface over time.