Lunaro Linear Panel Alabaster Chandelier - Brushed Brass

Description

The Lunaro is a 1200mm linear alabaster chandelier built around a brushed brass frame with a row of carved Spanish alabaster panels suspended along its length. Twelve E14 lamps sit behind the panels (sold separately), casting light through the natural stone so that each panel glows independently. The fitting suspends from two brushed brass rods on a 1000mm cable, giving an overall drop adjustable on installation.

Designed for long surfaces, the Lunaro suits dining tables of 1.6m or longer, kitchen islands, and boardroom or hospitality settings where balanced linear illumination is needed across a span. The 1200mm length and 400mm width sit comfortably above a standard 6-8 seat dining table when hung 700-800mm above the surface. Twelve separate E14 lamps spread the light evenly across the run rather than concentrating it in one centre point.

Each alabaster panel is cut from natural Spanish stone, so the veining, mineral patterning and tonal variation differ between panels and between individual fittings. The panels are fixed to the brushed brass frame with small visible brass screw heads along the upper edge, leaving the carved faces uninterrupted. Combined height is 280mm, and the brushed finish on the brass softens reflections under direct light. The fitting weighs enough to require a ceiling rated for chandelier loads, fixed into a joist or with a suitable brace.

Specification

Frequently Asked

What bulbs does the Lunaro take?

The chandelier takes twelve E14 (small Edison screw) lamps, sold separately. Most owners pair this with warm-white LED candle bulbs between 4-6W and 2700K-3000K to match the warm tone of the alabaster.

What size table or island does it suit?

The 1200mm length suits dining tables of 1.6m or longer and kitchen islands of similar span. Hung 700-800mm above the surface, it provides even illumination along the length without obstructing sightlines across the table.

Do the alabaster panels vary between fittings?

Yes. Each panel is cut from natural Spanish alabaster, so veining, mineral patterning and translucency differ between panels and between individual chandeliers. This is a feature of the natural stone rather than a defect.

How is the drop adjusted?

The chandelier suspends from two brushed brass rods with a 1000mm cable length. The drop is set during installation by the electrician, allowing the fitting to be hung at the correct height for your ceiling and table or island below.