Elyra LED Alabaster Wall Light - Brushed Brass

Description

The Elyra is a 530mm wide LED wall light built around a circular natural Spanish alabaster disc, intersected horizontally by a linear brushed brass bar. An integrated 3000K LED concealed behind the disc washes the back of the alabaster, turning the stone itself into the lit surface and revealing the natural veining held within each piece of cut alabaster.

Designed for hallways, landings, living rooms and bedrooms, the Elyra works as ambient and decorative wall lighting rather than directed task light. The 95mm shallow depth lets it sit close to the wall in narrower spaces such as corridors and stairwell walls without protruding into the circulation route. Pair it either side of a bed as a headboard alternative, mount it above a console table, or run it as a sequence along a longer wall for a rhythmic effect.

The combination of solid copper structure, natural Spanish alabaster and brushed brass finish gives the fitting weight and material honesty rather than a thin pressed-metal feel. At 320mm tall and 530mm wide the Elyra reads as a substantial wall piece without dominating, and the brushed brass bar projects beyond the disc on both sides to break the strict circle and add a horizontal architectural line. Each alabaster disc shows different mineral patterning, so no two installed Elyras are identical when lit.

Specification

Frequently Asked

Does the Elyra come with a bulb?

Yes. The Elyra uses an integrated LED rated at 3000K warm white on 230V mains. There is no separate bulb to fit or replace, and the LED is built into the fitting at manufacture.

Is it dimmable?

Dimmer compatibility depends on the specific dimmer module used with integrated LED drivers. Please contact us before pairing the Elyra with a dimmer so we can confirm suitability for your circuit.

Can it be installed in a bathroom?

The Elyra is supplied without a bathroom IP rating, so it is intended for general interior use in hallways, bedrooms, living rooms and similar dry locations rather than within bathroom zones.

Does the alabaster vary between pieces?

Yes. Each disc is cut from natural Spanish alabaster, so the veining, tonal variation and translucency differ between individual pieces. This is a feature of the natural stone rather than a defect, and the variation is most visible when the LED is lit.