Aurevia 5 Light LED Alabaster Cluster Chandelier - Brushed Brass

Description

The Aurevia is a five-light cluster pendant built around five flattened dome shades cut from natural Spanish alabaster, each suspended on its own cable from a 360mm circular brushed brass canopy. Each dome houses an integrated LED that emits warm 3000K light through the stone, with a small brushed brass disc finishing the underside of every shade. The cables drop to a maximum of 2800mm and can be set independently, so the five domes can hang level or be staggered at different heights.

The cluster format suits stairwell voids, double-height entrance halls and round dining tables where a vertical composition reads better than a single horizontal fitting. Above a stairwell, staggering the five drops across a 1.5-2m vertical span fills the void without crowding it. Above a circular dining table of 1.2m or larger, hanging the domes closer together at a uniform height creates a tighter focal cluster roughly 700-800mm above the table surface.

Each alabaster dome shows individual mineral veining, so the five shades in a single fitting will not look identical when lit — the variation is part of the natural material. The brushed brass canopy and small base discs introduce a warm metallic counterpoint to the soft white stone, and the brushed finish keeps reflections low under both daylight and artificial light. The integrated LEDs remove the need to source matched bulbs across the five shades.

Specification

Frequently Asked

What ceiling height does the Aurevia need?

The cables drop to a maximum of 2800mm and are shortened on installation. The fitting suits stairwells, double-height halls and rooms with ceilings above 2.6m. For a standard 2.4m ceiling, the cables can be cut down and the cluster hung tighter, but a stairwell void or vaulted space lets the staggered drops show at their best.

Can the five domes hang at different heights?

Yes. Each dome is suspended on its own independent cable, so the five drops can be set staggered across a vertical span for a stairwell, or levelled at a single height for a dining table. Heights are adjusted at installation by setting the cable length at the canopy.

Will the alabaster look the same on every dome?

No. Each dome is cut from natural Spanish alabaster, so veining, tonal variation and translucency differ between the five shades in a single fitting. This is a feature of the natural stone, not a defect, and becomes most visible once the LEDs are switched on.

Are the LEDs replaceable?

The 3000K LED modules are integrated into each dome rather than user-replaceable bulbs. Integrated LEDs are rated for tens of thousands of hours of use and remove the need to source matched bulbs across the five shades.