Aurelia LED Alabaster Wall Light - Brushed Brass

Description

The Aurelia is a 530mm vertical alabaster wall light built from stacked cylindrical sections of natural Spanish alabaster, capped top and bottom with brushed brass fittings. An integrated 10W 3000K LED runs through the column, lighting the stone from within so the alabaster itself acts as the diffuser. Width is 120mm with a 60mm projection from the wall.

The slim, tall format suits hallways, stairwells, ensuite walls and either side of a bed or vanity mirror. At 60mm projection the fitting sits close to the wall and won't catch shoulders or sleeves in narrower passages. Mounted in pairs it works as flanking light around a headboard, doorway or fireplace; mounted singly it provides a vertical accent on a section of plain wall. The brass top and bottom caps anchor the column without interrupting the run of stone.

The central alabaster section shows the heaviest mineral veining, with warmer amber and grey tones running through the stone, while the upper and lower sections read closer to soft white. Because the alabaster is cut from natural blocks, each Aurelia carries its own pattern of veining and translucency once lit. The solid copper internal frame and brushed brass end caps give the piece a substantial, well-weighted feel against the wall.

Specification

Frequently Asked

Does the Aurelia come with a bulb?

Yes. The light source is a built-in 10W LED running on 230V mains at 3000K (warm white), so no separate bulb is required. The LED is integrated into the fitting and is not user-replaceable.

Is it dimmable?

The integrated LED runs at 10W on 230V mains. Dimmer compatibility depends on the specific dimmer model, so please contact us before pairing with a dimmer to confirm.

Can it be installed in a bathroom?

This wall light is not supplied with a bathroom IP rating, so it should be installed outside bathroom zones. It suits bedrooms, hallways, stairwells, living rooms and dressing areas.

How is the alabaster cleaned?

Alabaster is porous and softer than marble. Wipe gently with a dry, soft microfibre cloth. For more stubborn marks, a barely-damp cloth with distilled water is acceptable, but avoid soaking the stone and do not use household sprays, polishes or chemical cleaners.